product
Product
2Flutes Long Neck Short Flute End Mill
Cutter types of use: Stainless Steel、Cast Iron、Aluminum、Copper、Graphite、Plastics、Composite Material、Titanium、Nickel、Heat-resistant Steed、
Non-alloyed、Low-alloyed Steed＜24HRC、Hi-alloyed Steed＜30HRC、Hardened Steel 30-38HRC 38-48HRC 48-56HRC 56-68HRC
| TECHNOLOGY PARAMETERS UNIT:mm | ||||||||||
| Specification | Specificarion | |||||||||
| d | D | l1 | l | L | d | D | l1 | l | L | |
| 0.4 | 4 | 0.6 | 2 | 50 | 1.5 | 4 | 1.7 | 8 | 50 | |
| 0.4 | 4 | 0.6 | 4 | 50 | 1.5 | 4 | 1.7 | 10 | 50 | |
| 0.5 | 4 | 0.8 | 2 | 50 | 1.5 | 4 | 1.7 | 12 | 50 | |
| 0.5 | 4 | 0.8 | 4 | 50 | 2 | 4 | 2.2 | 6 | 50 | |
| 0.5 | 4 | 0.8 | 6 | 50 | 2 | 4 | 2.2 | 8 | 50 | |
| 0.6 | 4 | 1 | 2 | 50 | 2 | 4 | 2.2 | 10 | 50 | |
| 0.6 | 4 | 1 | 4 | 50 | 2 | 4 | 2.2 | 12 | 50 | |
| 0.6 | 4 | 1 | 6 | 50 | 2 | 4 | 2.2 | 14 | 50 | |
| 0.6 | 4 | 1 | 8 | 50 | 2 | 4 | 2.2 | 16 | 75 | |
| 0.8 | 4 | 1.2 | 3 | 50 | 3 | 4 | 3.2 | 8 | 50 | |
| 0.8 | 4 | 1.2 | 4 | 50 | 3 | 4 | 3.2 | 10 | 50 | |
| 0.8 | 4 | 1.2 | 6 | 50 | 3 | 4 | 3.2 | 12 | 50 | |
| 0.8 | 4 | 1.2 | 8 | 50 | 3 | 4 | 3.2 | 14 | 50 | |
| 0.8 | 4 | 1.2 | 10 | 50 | 3 | 4 | 3.2 | 16 | 75 | |
| 1 | 4 | 1.2 | 4 | 50 | 3 | 4 | 3.2 | 20 | 75 | |
| 1 | 4 | 1.2 | 6 | 50 | 4 | 6 | 4.2 | 12 | 50 | |
| 1 | 4 | 1.2 | 8 | 50 | 4 | 6 | 4.2 | 14 | 50 | |
| 1 | 4 | 1.2 | 10 | 50 | 4 | 6 | 4.2 | 16 | 75 | |
| 1 | 4 | 1.2 | 12 | 50 | 4 | 6 | 4.2 | 20 | 75 | |
| 1.5 | 4 | 1.7 | 4 | 50 | 4 | 6 | 4.2 | 25 | 75 | |
| 1.5 | 4 | 1.7 | 6 | 50 | ||||||
ADD:Tian Xin Road, WuJin District, Changzhou, Jiangsu,China
Phone: +86-13815018181
Tel:+86-519-83856060
Skype: zhou.joanna9
Email: joanna@drakecn.com
Phone: +86-13815018181
Tel:+86-519-83856060
Skype: zhou.joanna9
Email: joanna@drakecn.com
