Cutter types of use: Stainless Steel、Cast Iron、Aluminum、Copper、Graphite、Plastics、Composite Material、Titanium、Nickel、Heat-resistant Steed、
Non-alloyed、Low-alloyed Steed<24HRC、Hi-alloyed Steed<30HRC、Hardened Steel 30-38HRC 38-48HRC 48-56HRC 56-68HRC
TECHNOLOGY PARAMETERS UNIT:mm | ||||||||||
Specification | Specification | |||||||||
R | D1 | L1 | D | L | R | D1 | L1 | D | L | |
0.5 | 1 | 2 | 4 | 50 | 4.5 | 9 | 20 | 10 | 75 | |
1 | 2 | 4 | 4 | 50 | 5 | 10 | 20 | 10 | 75 | |
1.5 | 3 | 6 | 4 | 50 | 6 | 12 | 20 | 12 | 75 | |
2 | 4 | 8 | 4 | 50 | 7 | 14 | 25 | 14 | 80 | |
2.5 | 5 | 10 | 6 | 50 | 8 | 16 | 25 | 16 | 100 | |
3 | 6 | 12 | 6 | 50 | 9 | 18 | 40 | 18 | 100 | |
3.5 | 7 | 16 | 8 | 60 | 10 | 20 | 40 | 20 | 100 | |
4 | 8 | 16 | 8 | 60 |